Question: On my last order I purchased a Shurflo 8000-543-236 12V 60psi 1.26gpm Viton/Santoprene Pump w/Demand Switch (aka 8009-543-236), and in the...
The thickness of the hose does not matter but the issue about pulse hose does matter. In order to maintain the proper life expectancy of the PumpTec...
I tried that again with no luck. But last year i took M-12 to repair shop to put a new wire harness in my machine because circut indicator burned up....
I bought a package deal with my CrossAmerican Jag. I'm almost positive the wand it contained was the 2-jet Samco wand. The brass jets have about 300...
Sometimes you can have a small air pocket in the pump system and this will cause the pressure drop, OR the pump pre-filter is dirty (like you already...
Pressure drops down to 400-500 psi when i hook up th-40 and 4 jet Gekko ( bigger jets). When i use mini turbo, cobra and single jet Gekko it stays at...
I think you should always prespray and agitate first before your hot water extraction rinse. You might not need to use a power scrubber but at least...
Response to answer to Question 1; I understand having water coming through the vacuum motors, overflowing or blowing inside and outside the extractor...
