Welcome to the Steam-Brite Forums.
Direct all your technical problems here.
A reliable method of duct cleaning which allows for a lower vacuum requirement. A separate cable rotates the brush for agitation (internal OR external to the vacuum hose). Commonly powered by your own cordless drill.
September 3rd, 2013
Having the ability to image the rarely seen, opens the door to jobs you may have otherwise missed out on. (At 30 frames a second, a video is worth 1.8 Million words a minute.)
Purpose built machines for maximizing air flow at a level still acceptable for both residential and commercial ducts alike; servicing far longer and WIDER duct work. Is best complimented by physical agitation.
June 8th, 2016
Very similar to your standard Carpet Cleaning Machine, but instead includes a high pressure 1000psi + water pump, while having the electric inline heater removed (as over 6000 watts of power would be needed to heat water effectively at such pressures).
September 1st, 2016
Also called Floor Scrubbers, Floor Polishers, Buffers, this is a machine designed to apply high torque to multiple flooring surfaces. The same machine does MANY jobs by just a change of the head (see: brushes/pad driver/bonnets/sanding screens/buffing/polishing/honing/stripping)
September 15th, 2015
Water pressure driven tile cleaning class of tile wands, which feature very narrow jets at a fixed angle, which drive the rotation, as based on input pressure. A 12inch standard surface cleaner is best used at 1200psi+ (although the wand jetting can be customized/configured to best match it's input water source.)
January 14th, 2017
When determining your air mover needs, remember that an air mover's purpose is "drying" which in application is "Rapid Evaporation". A very wet surface has many factors that promote trying, and the more these factors get used simultaneously, the more quickly evaporation can occur. Axial Fans work to bring warm air from the ceiling down, (as warm air promotes drying better) while standard "Centrifugal" (Snail Shell) Fans aim for high CFM (as air flow greatly influences evaporation rates)
March 13th, 2016
Moving high air "volume" (different from air "pressure") through a HEPA (High-efficiency particulate arrestance) filter pulls airborne debris and contaminates out of the air. (Determining the cubic footage of the area to be filtered, and dividing that by the cfm of your air scrubber, will tell you how many minutes it will take for your machine to complete one full air exchange of that area.)
November 7th, 2013
Restoration equipment designed to pull ambient moisture out of the air, (once evaporated, see Air Movers) and route that moisture out of the area. A dehumidifier's efficiency is based on the environment it sits in; it will perform best in high humidity/high temperature areas. As you approach the freezing point of water, the air loses it's ability to hold moisture, and efficiency drops to zero. A Condensate Pump will allow stored water to be pumped vertically (rather than just gravity alone), and a Humidistat would allow the user to activate/deactivate to preference (for times when a specific humidity level needs to be maintained).
March 26th, 2015
Flood pumpers are suction machines designed for the quick removal, and transportation of standing water. Portable extractor versions utilize a sump pump within the waste tank, which becomes activated by the rising water level. For truckmounts, this commonly is not a separate machine, but rather a feature either built-in, or excluded from the machine's assembly. (See: Clutched pump / Exhaust Diverters)
December 21st, 2015
Foggers come in two main varieties, based on which product you intend to fog with. If the product is of a solvent base, then you would need to heat it to make the fog, and as such you would need a Thermal Fogger. If the product is water based, then it can be made into water droplets, and instead you would want a ULV-Fogger (Ultra Low Volume).
March 31st, 2014
Ozone is generated by passing an electric current over a media, and causing a free floating O (Oxygen) molecule to temporarily fuse to another free floating O2 (Di-Oxygen) molecule, and producing O3 (Tri-Oxygen, aka Ozone!) Care needs to be taken when applying the gas, as it is so powerful, it works on ALL organics (it is equally effective against cigarette odors, as it is against People, Plants, Pets, and ages Leather rapidly ) BUT! Ozone naturally turns back into its parts (Di, and regular Oxygen molecules) in about an hour, so there is minimal downtime. --- UV emitters however CAN be used in occupied areas, as they use Ultra Violet wavelengths of light to sanitize the air passed through the machine.
August 30th, 2015
Much like a ceiling fan in design, a vacuum motor is comprised of one part electrical intake (rated with wattage) and one part rotating fan blade (rated by diameter). A Multi-Stage Motor, is one that has multiple blades mounted to a the same electric motor. Most Portable Extractors will feature either 2, 3, or 4 vacuum motors within a single machine, (each motor being either single, dual, or triple stage motors) Air flow is rated as both pressure, and volume, and HOW each motor is connected affect either whether you would experience higher Water Lift, or higher CFM.
December 6th, 2016
Diaphragm pumps cover pressure ranges from 45 - 200psi, (at 1-2 gpm) and Piston style electric pumps span a pressure range of 200 - 1500psi (1-2gpm). Followed by belt driven pumps covering up to 3000psi (at 1-4gpm), and ending with direct-engine-bolted pressure washers which max out around 10K psi.
September 25th, 2015
Electric water heaters span a wattage range of 900-2400 watts for portable extractors (beyond this wattage would require a 230V connection, or access to more than 20amps) And net a temperature increase between 8-30 degrees of "instant temperature". (Note: instant temperature does not factor for time the water has spent motionless through the assembly. When not in motion, a thermostat controls maximum temperature, commonly set to 190F)
June 28th, 2016
Carpet Glides aim to allow carpet wands to more smoothly glide over hard surfaces, and also selectively restrict airflow to net a small performance boost at the head of the wand, directly where it meets the fiber.
August 14th, 2014
There are currently 102 users online. 0 members and 102 guests
Most users ever online was 3,706, January 24th, 2016 at 07:39 AM.
42249 Spammers Denied Registration
2 Spammers Permanently Banned
2 Spammers submitted to Akismet
80541 Spammy Posts Automatically Moderated