more vacuum to the goliath

[jazonfire]

hi Donald I just wanna know what's the best way to add two more 5.7 2 stage vacuum motors on the goliath I know this will add one more cord to the set up how many vacuum units will this add to it

[Donald]

Adding more vacuum to the Goliath

The Goliath Flood Pumper model has an optional vacuum port mounted on the lid. Just remove the PVC cap and tie in your two extra vacuum motors.

http://www.steam-brite.com/dristorm-goliath-flood-pumper-20gal-four-stage-vacs-pressure-washer-recovery-120v-with-lint-filtration-p-6271.html

look at the drop down list Option 1: this adds $100 to the cost of the machine.
This option is only available on the flood pumper model

[jazonfire]

The Goliath Flood Pumper model has an optional vacuum port mounted on the lid. Just remove the PVC cap and tie in your two extra vacuum motors.

http://www.steam-brite.com/dristorm-goliath-flood-pumper-20gal-four-stage-vacs-pressure-washer-recovery-120v-with-lint-filtration-p-6271.html

look at the drop down list Option 1: this adds $100 to the cost of the machine.
This option is only available on the flood pumper model

Donald my goliath didn't come with the extra vac port what's the best way of adding it

[Donald]

Goliath vacuum port addition

We only add the extra vacuum port on the 20 gallon flood pumper model. The 15 gallon 500 psi machine waste tank is too small.

[jazonfire]

We only add the extra vacuum port on the 20 gallon flood pumper model. The 15 gallon 500 psi machine waste tank is too small.

Hi Donald with the 15 gallon flood pumper would it be possible to just hook up to the exhaust of the other vacuum motors then run it 3*3 I know this would add one or two more cords would increase my lift and cfms or put a hole in the system and I lose lift and cfm

[Donald]

12 stage portable extractor system

The Goliath is available in a flood pumper 20 gallon model with an optional vacuum port on the roof and the 15 gallon models do not have that option.
On machines that do not have booster ports you can always connect a second machine direct to the drain port or use hose mount vacuum boosters.
Hose mount boosters add vacuum between two sections of vacuum hose.

Two more series mount vacuum motors would make the machine be at 170" @ 375 cfm or 63,750 vacuum units