Announcement

Collapse
No announcement yet.

Evolution of Mytee Escape ETM Truckmounts

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Evolution of Mytee Escape ETM Truckmounts

    1. 2014 Quad 3 stage 5.7" vacuum motors 40 amp vacuum, Pumptec 356U water pump, 30 gallon discharge, wired all 230 volts. Needed 55 amps to operate at 120 volts on 2 phases / 4 breakers. Wired with dual 12/3 cords with L6-30 plugs. We emailed the factory that this cord needed to be dual 10-3 cord to prevent internal component burn up. They never made the change, rather discontinued the build.
    2. Same as above but switched to manual waste tank float shut off to electronic vacuum motor shut off. Later this feature was removed as the relay switches burned up.
    3. Dual 6.6 LX motor 28 amp vacuum, 500 psi Cat water pump, 30 gpm auto dump. No chemical injection should be used as this Cat pump is not rebuildable and easily destroyed by chemical injection. Included a free 6.6 vacuum booster for the first year. Then the booster became optional.
    4. Triple 6.6 LX motors, 42 amp vacuum, 1000 psi Pumptec 356u water pump, 30 gallon discharge
    5. 2021 Triple 6.6 LX motors, 42 amp vacuum, 1000 psi Pumptec 356u water pump, 3.3 gallon discharge (water extraction work capabilities removed)
    The change the vacuum waste tank lid over the years but I do not remember when.
    They used to include the wheels but now is optional.

    Related links:
    Mytee Escape Truckmount
Working...
X
😀
🥰
🤢
😎
😡
👍
👎