Samco wand replacement jet

[dekare]

I bought a package deal with my CrossAmerican Jag. I'm almost positive the wand it contained was the 2-jet Samco wand. The brass jets have about 300 hours on them. I clean at 350 PSI. Just wondering if they should be replaced and do you carry them in replacement stainless steel. The jets are marked Dam 110-1. I assume that means they are a size .0001 and should be replaced with the same?

[Donald]

Carpet Cleaning Spray jet Help

Yes, you wand jets are 11001 or 110 degrees with an 01 opening. You can order replacements in brass

http://www.steam-brite.com/teejet-brass-11001-p-4953.html

or stainless steel

http://www.steam-brite.com/teejet-11001-stainless-steel-b142-p-13304.html

If you change the jet size to the next larger opening 110015 you will increase your water flow (gallon per minute) but the total highest psi that the pump can achieve will be lower that what you can get with the 11001 jets. I do think you should purchase some 015 jets too because sometimes you will show up on jobs that you need to process more water through. For example one time a customer had me clean a vacant home that the tenant overhauled and engine in the living room because it was too hot to work outside. The key was getting the carpet clean and not how fast I could get it dry.
Brass

http://www.steam-brite.com/teejet-brass-110015-p-4954.html

and
Stainless

http://www.steam-brite.com/teejet-110015-stainless-steel-b144-p-13305.html