Tweet
Question: I purchased a brand new Mytee spinner tile cleaning wand and the T bar hits and rubs the underside of the dome. What do I need to do?
Answer: Please visit
The lower right side of the photo is lower part of your pressure swivel/spinner.
The "T" bar is screwed on too far onto the threads of the swivel.
You have to remove the "T" bar and place about 12 clockwise wraps of teflon pipe thread tape on the threads and not screw the "T" bar on so far as it is now.
While the "T" bar unit is off, you have to round off the far exterior corners of the "T" bar with a bench grinder. (Optional but recommended). Retest.
Answer: Please visit
The lower right side of the photo is lower part of your pressure swivel/spinner.
The "T" bar is screwed on too far onto the threads of the swivel.
You have to remove the "T" bar and place about 12 clockwise wraps of teflon pipe thread tape on the threads and not screw the "T" bar on so far as it is now.
While the "T" bar unit is off, you have to round off the far exterior corners of the "T" bar with a bench grinder. (Optional but recommended). Retest.