Announcement

Collapse
No announcement yet.

Spinner wand use at 500psi

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Spinner wand use at 500psi

    Question: I am interested in purchasing a spinner wand for tile cleaning. I have a portable extractor with a max of 500 psi. The specs on the wand are 500psi-3000psi. Will my portable be enough, I know that I'm giving the wand the min psi Thanks

    Answer: I think you should consider a fixed jet wand and not a spinner tool. I have had several past customer tell me that it does work at 500 psi but the impact of the jet is less because the jet is pushing the bar around. Spinner wands have the jets angled between 11 to 45 degree. The low water pressure would clean better if it was straight down.

    There are too many times that this should say, "spinner starts to spin between 500 and 1000 psi"
    Chances are it is going to work at 500 psi but do you really want to risk a 25% restocking fee if it does not work and you have to return it?
    And even this is only returnable if it is brand new. Once you take it on a job and us it, it is used and not returnable.

    Related link
    Wands for Hard Floor And Spinner, Equipment Hard Surface Supplies, Typhoon Tile Wand - 16in, PMF Hard Surface Floor Tool 800 psi valve, Hydroforce Gekko Hand Held Hard Surface Wand AR52, Turboforce Cobra Tile & Grout Hand Tool TF-C150 Free Shipping...

    and
    Question: I am interested in purchasing a spinner wand for tile cleaning. I have a portable extractor with a max of 500 psi. The specs on the wand are 500psi-3000psi. Will my portable be enough, I know that I'm giving the wand the min psi Thanks

    Answer: I think you should consider a fixed jet wand and not a spinner tool.
    There are too many times that this should say, "spinner starts to spin between 500 and 1000 psi"
    Chances are it is going to work at 500 psi but do you really want to risk a 25% restocking fee if it does not work and you have to return it?

    Related link
    Wands for Hard Floor And Spinner, Equipment Hard Surface Supplies, Typhoon Tile Wand - 16in, PMF Hard Surface Floor Tool 800 psi valve, Hydroforce Gekko Hand Held Hard Surface Wand AR52, Turboforce Cobra Tile & Grout Hand Tool TF-C150 Free Shipping...

    and
    Turboforce Raptor Classic 5in Tile Cleaning Wand Free Shipping rc5, RC-5, Wands for Hard Floor And Spinner, Equipment Hard Surface Supplies, by Turbo Force, This grout line and edging tool features an all new brass manifold and internal pressure line g...

  • #2
    spinner wands with portables

    Originally posted by Donald
    Question: I am interested in purchasing a spinner wand for tile cleaning. I have a portable extractor with a max of 500 psi. The specs on the wand are 500psi-3000psi. Will my portable be enough, I know that I'm giving the wand the min psi Thanks

    Answer: I think you should consider a fixed jet wand and not a spinner tool. I have had several past customer tell me that it does work at 500 psi but the impact of the jet is less because the jet is pushing the bar around. Spinner wands have the jets angled between 11 to 45 degree. The low water pressure would clean better if it was straight down.

    There are too many times that this should say, "spinner starts to spin between 500 and 1000 psi"
    Chances are it is going to work at 500 psi but do you really want to risk a 25% restocking fee if it does not work and you have to return it?
    And even this is only returnable if it is brand new. Once you take it on a job and us it, it is used and not returnable.

    Related link
    Wands for Hard Floor And Spinner, Equipment Hard Surface Supplies, Typhoon Tile Wand - 16in, PMF Hard Surface Floor Tool 800 psi valve, Hydroforce Gekko Hand Held Hard Surface Wand AR52, Turboforce Cobra Tile & Grout Hand Tool TF-C150 Free Shipping...

    and
    Question: I am interested in purchasing a spinner wand for tile cleaning. I have a portable extractor with a max of 500 psi. The specs on the wand are 500psi-3000psi. Will my portable be enough, I know that I'm giving the wand the min psi Thanks

    Answer: I think you should consider a fixed jet wand and not a spinner tool.
    There are too many times that this should say, "spinner starts to spin between 500 and 1000 psi"
    Chances are it is going to work at 500 psi but do you really want to risk a 25% restocking fee if it does not work and you have to return it?

    Related link
    Wands for Hard Floor And Spinner, Equipment Hard Surface Supplies, Typhoon Tile Wand - 16in, PMF Hard Surface Floor Tool 800 psi valve, Hydroforce Gekko Hand Held Hard Surface Wand AR52, Turboforce Cobra Tile & Grout Hand Tool TF-C150 Free Shipping...

    and
    http://www.steam-brite.com/turboforc...ng-p-4591.html
    It is foolish to attempt to use a spinner wand with a portable unless it is an auto-fill/auto-dump model. The wand will use too much water too fast for you to accomplish anything and you'll be frustrated, not to mention it will barely perform according to your expectations at that pressure. You need a hard-surface cleaning machine designed for that application which runs at a higher psi. Short of that, buy a high quality vapor steamer and change the approach.

    Comment

    Working...
    X
    😀
    🥰
    🤢
    😎
    😡
    👍
    👎