Question: How can the Goliath Quad 6.6 + 2100 psi pressure washer run on as few as one power cord or as many as 7?
Answer: You can cleaning with building pressure or high flow cleaning and then use the Goliath on one power cord to run one vacuum motor and auto dump (1 cord total).
You can run building pressure + 2 power cords on the Goliath.
You can run 2 power cords on the pressure washer + one power cord on the Goliath = 3 cords
You can run 2 cords on the pressure washer + 2 on the Goliath = 4 cords
You can run 2 cords on the pressure washer + 3 on the Goliath vacuum = 5 cords
You can run 2 cords on the pressure washer + 4 cords on the Goliath = 6 cords.
2 on pressure washer + 4 on the Goliath + 1 on the heater = 7 cords.
The Goliath vacuum system has a check valve in the waste tank to run off the vacuum so air does not travel through the machine if the vacuum motors are turn off. The more power you through at the vacuum system the longer hose runs you can perform.
Running on vacuum motor 12.4 amps =134” of H20 lift or 140 CFM = 18,760 vacuum units.
Running 2 vacuum motors air series 24.8 amps = 215" lift or 170 cfm = 36,550 vacuum units.
Running 2 vacuum motors in parallel 24.8 amps =
Ametek Lamb supplied test: 128" lift or 232 cfm = 29,696 vacuum units.
or SteamBrite test 131 inches or 274 cfm = 35,894 vacuum units
or Cross American test 131 inches or 298 cfm = 39,038 vacuum units
Running 3 motors, one in parallel and two in series. 37.2 amps on 2 two cords
174 inches of lift or 310 cfm = 53,940 vacuum units.
Running 4 motors on 4 cords Twin series pair configuration
340 cfm
215" lift
73,100 vacuum units
50 amp total vacuum system
(same performance of a 20 hp 36 blower gasoline truckmount)
Related links:
What is high flow extraction cleaning
Goliath Quad 6.6 vacuum + 2100 psi pressure washer
Lamb 6.6 vacuum motor
Answer: You can cleaning with building pressure or high flow cleaning and then use the Goliath on one power cord to run one vacuum motor and auto dump (1 cord total).
You can run building pressure + 2 power cords on the Goliath.
You can run 2 power cords on the pressure washer + one power cord on the Goliath = 3 cords
You can run 2 cords on the pressure washer + 2 on the Goliath = 4 cords
You can run 2 cords on the pressure washer + 3 on the Goliath vacuum = 5 cords
You can run 2 cords on the pressure washer + 4 cords on the Goliath = 6 cords.
2 on pressure washer + 4 on the Goliath + 1 on the heater = 7 cords.
The Goliath vacuum system has a check valve in the waste tank to run off the vacuum so air does not travel through the machine if the vacuum motors are turn off. The more power you through at the vacuum system the longer hose runs you can perform.
Running on vacuum motor 12.4 amps =134” of H20 lift or 140 CFM = 18,760 vacuum units.
Running 2 vacuum motors air series 24.8 amps = 215" lift or 170 cfm = 36,550 vacuum units.
Running 2 vacuum motors in parallel 24.8 amps =
Ametek Lamb supplied test: 128" lift or 232 cfm = 29,696 vacuum units.
or SteamBrite test 131 inches or 274 cfm = 35,894 vacuum units
or Cross American test 131 inches or 298 cfm = 39,038 vacuum units
Running 3 motors, one in parallel and two in series. 37.2 amps on 2 two cords
174 inches of lift or 310 cfm = 53,940 vacuum units.
Running 4 motors on 4 cords Twin series pair configuration
340 cfm
215" lift
73,100 vacuum units
50 amp total vacuum system
(same performance of a 20 hp 36 blower gasoline truckmount)
Related links:
What is high flow extraction cleaning
Goliath Quad 6.6 vacuum + 2100 psi pressure washer
Lamb 6.6 vacuum motor