Announcement

Collapse
No announcement yet.

Will the Hummel belt sanding machine work on the ReverseL6-20R power supply?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will the Hummel belt sanding machine work on the ReverseL6-20R power supply?

    Answer: It works with all 2, 3, and 4 HP Sanders that use 220-240 volts, single phase at less than 20 amps or in other words 4KW or less.
    Hummel model P001LED | 122.00.00.100 belt sanding machine website states 220v 2.9KW single phase.
    From your physics class this is 2900 watts divided by 240 = 12.08 amps;
    So yes this would work fine.
    Different sanding machine use different NEMA male plugs. You would want to match your plug configuration to the correct power supply box. We make these boxes in all the different NEMA configurations that are available in the USA.
    You will notice this one is a NEMA L6-20R The "R" mean receptacle while the "P" means plug.​
    Link
    Power Joiner Step Up Inverter Converts Dual 20 amp 120 Volt outlets to allow 240 Volt 4 wire 20 amp Use ReverseL6-20R , ReverseL6-20R, Electrical Adapter Temporary Power Boxes, Parts & Accessories, by Clean Storm,     Power Inverter Rever...

Working...
X