Tweet
Question: You are selling a dema auto fill, says it's been removed from a porty. I am looking to install auto fill to my 10gal machine, and eventually improve the 100psi pump. Is the dema float a perm install? And if so, does it include rubber gasket for hole made in extractor? Thanks in advance...( I don't need auto dump since I have a air hog w that)
Rich
Answer: http://www.steam-brite.com/dema-auto...bt-p-3993.html
The above kit is used by many manufactures and some pass the water though the top ceiling of the fresh water tank or through the front side of the fresh water tank. The parts to pass through the tank wall are not included in the kit. You can convert your machine to suction feed auto fill with chemical injection with the item above or you can convert your machine to pressure feed auto fill with the kit below
Please note that pressure feeding machines will add the building pressure to your pump pressure.
Please also look at the aquatec 220 psi pumps
When we pressure feed these pumps we clean at 250 psi.
Related links:
Mytee air hogs
Tank bulkhead fitting
Examples of machines that use this kit through the top of the fresh water tank.
Rich
Answer: http://www.steam-brite.com/dema-auto...bt-p-3993.html
The above kit is used by many manufactures and some pass the water though the top ceiling of the fresh water tank or through the front side of the fresh water tank. The parts to pass through the tank wall are not included in the kit. You can convert your machine to suction feed auto fill with chemical injection with the item above or you can convert your machine to pressure feed auto fill with the kit below
Please note that pressure feeding machines will add the building pressure to your pump pressure.
Please also look at the aquatec 220 psi pumps
When we pressure feed these pumps we clean at 250 psi.
Related links:
Mytee air hogs
Tank bulkhead fitting
Examples of machines that use this kit through the top of the fresh water tank.