Mytee HP60 Spyder upgrades

[Dan O]

I have a Mytee HP60 that I've been using for a few years. It is the older model with the 100psi pump. I would like to upgrade this with a higher psi pump and also to an internal spray wand. Could you point me to the parts I would need to do this?

Thank you, Dan.

[Donald]

Converting Mytee HP60 to Bi-Directional cleaning

You would need to remove the 100 psi system and install the 170 to 220 psi system.
170 psi you need to add a cool clip and the 220 psi you need to add a cool clip and cooling fan.
170 is located at

http://www.steam-brite.com/aquatec-triplex-diaphragm-switched-bypass-pump-volts-5800-p-8748.html

220 psi is located at

http://www.steam-brite.com/aquatec-triplex-diaphragm-pressure-switched-bypass-pump-volts-p-10801.html

Cool clip is located at

http://www.steam-brite.com/shurflo-heat-sink-cover-continuous-pump-longer-life-34007-p-11287.html

Cooling fan is located at

http://www.steam-brite.com/clean-storm-universal-carpet-cleaning-machine-cooling-volts-p-12186.html

Internal spray tool is located at

http://www.steam-brite.com/advanced_search_result.php?keywords=internal+spray

Related Links:
Mytee HP60

http://www.steam-brite.com/mytee-hp60-spyder-6gal-120psi-heated-stage-vacuum-hose-open-spray-tool-auto-detail-machine-p-10117.html

Mytee HP60-200-Plus (Already upgraded to 200 psi with bidirectional cleaning)

http://www.steam-brite.com/mytee-hp60200-plus-auto-detail-6gal-200psi-heated-stage-internal-spray-hand-tool-bidirectional-cleaning-p-11114.html

Mytee HP60 starter package

http://www.steam-brite.com/mytee-hp60-auto-detail-6gal-100psi-heated-stage-vacuum-starter-package-hose-plus-wand-spyder-p-4190.html

[Dan O]

You would need to remove the 100 psi system and install the 170 to 220 psi system.
170 psi you need to add a cool clip and the 220 psi you need to add a cool clip and cooling fan.
170 is located at

http://www.steam-brite.com/aquatec-triplex-diaphragm-switched-bypass-pump-volts-5800-p-8748.html

220 psi is located at

http://www.steam-brite.com/aquatec-triplex-diaphragm-pressure-switched-bypass-pump-volts-p-10801.html

Cool clip is located at

http://www.steam-brite.com/shurflo-heat-sink-cover-continuous-pump-longer-life-34007-p-11287.html

Cooling fan is located at

http://www.steam-brite.com/clean-storm-universal-carpet-cleaning-machine-cooling-volts-p-12186.html

Internal spray tool is located at
http://www.steam-brite.com/advanced_...internal+spray

Thank you for the quick reply. No internal hose modifications needed? Do recommend adding a cooling fan to this upgrade?

[Donald]

Adjust the heater safety pressure valve

The pressure hoses should be fine. The high performance pump work harder and get hotter. This is the reason for the extra cool clip and cooling fan. In some rear cases you might have to adjust the heater over pressurization valve. Visit

http://www.steam-brite.com/clean-storm-safety-pressure-relief-valve-p-11606.html

To adjust, remove the top cap and use a screw driver to turn the spring on revolution clockwise. Replace cap.